Originated and Made in USA by Gene Berg Enterprises from 1970 GB 211 4 quart aluminium racing sump. Measures 3.750" deep, 9" front to rear and 10.5" wide. Clears all Berg exhaust and traction bars. Includes all hardware including the new special Berg installing nuts (GB 210NUT) to install without changing the factory case studs. This provides extremely fast on and off for race engine disassembly. We ship the 3/4" (GB 216) pickup tube for 1970 and later German, Mexican, some 1993-on Brazilian cases unless you specify differently. Specify 5/8" (GB 216A) tube if you have a Brazilian single or dual oil pressure relief valve case. Complete with GB 218A metric hardware kit, exclusive Berg mounting nuts that mount this thick flanged sump onto the stock factory case studs and gasket kit. SW 14# Mandatory for all drag race engines that turn over 6500 RPM Note 1: Berg sumps are pressure tested to assure a leak free part. Note 2: All Berg castings have titanium and boron added to the aluminium to provide stronger castings than anyone's in the industry.
|